Beomaster 1900 / 2400 potentiometer repair kit

You are looking at a repair set for the sliding potentiometers used for the tonecontol in some of the classic 1970s Bang & Olufsen design stereo receivers.

The problem with the original part is that the sliding part of the potentiometer breaks, causing the little bronze sliders underneath to lose contact.
This again causes dropouts or completely silent channels, sluggish, intermittent or completely non-working tonecontrols etc.
The problem affects the bass, treble and balance sliders in Beomaster 1900, Beomaster 1900-2, Beomaster 2300, Beomaster 2400 and Beomaster 2400-2.

The potentiometers were custom produced for B&O and replacement parts has been unavailable for ages.
A new type of replacement potentiometers were available from B&O at some point but it was only for a very short period of time and only very few receivers got them.

This kit is for the old type potentiometers RUWIDO PSK 13.359.00 (the ones that break).
It contains the three pieces needed to repair the bass, treble and balance control sliders.

The new parts have been improved over the originals in that the material has been made practically unbreakable and the problem areas were made stronger, all to prevent future problems.

Fitting instructions included (photos and english text).
Basic electronic skills and tools (a little soldering) is required to replace the parts.
You will replace only the broken plastic parts. You will transfer the little bronze contacts to the new parts and you will reuse the rest of the original potentiometers.

To order please go to the webshop HERE